Description
Protective and decorative polyurethane-based water-based wood varnish for interior and exterior surfaces. Due to its special composition, it effectively prevents the growth of mold and fungi on its membrane. It impregnates the wood, forming a thin film while allowing it to breathe. It follows the contractions of the wood due to its elasticity and protects it from moisture and UV radiation.
- For indoor and outdoor use, reinforced with polyurethane
- With special UV filters for maximum resistance to solar radiation
- It impregnates the wood, forming a thin film allowing it to breathe at the same time
SHADES
Available colorless, in 11 ready-made natural shades and selected shades through the Vitex Coloring Tinting System.
FINISH
Available in Natural finish.
PROCESSING
Surfaces must be clean, dry, free of resin, oil or old varnish. Diaxyl Extra wood preservative is applied to new wooden surfaces to protect against fungi and insects.
APPLICATION
The product is stirred well before use. It is applied in one or two coats by brush, roller or gun without thinning. It should not be applied at temperatures lower than 5 o C, higher than 35 o C and/or relative humidity above 80% or when the moisture of the wood exceeds 18%.
The product is dry to the touch in 2-3 hours and can be repainted after 24 hours. These times vary according to weather conditions (relative humidity and temperature). The final shade depends on the natural color and absorbency of the wood, as well as on the number of layers of Diaxyl Plus Water .
Tools are cleaned immediately after use with water and if necessary with soap or detergent.
